Weitec Performance Springs for Volvo 850 and P1 C70/S70/V70

Weitec performance spring sets are now available from DVS and are an ideal handling upgrade for Volvo 850 and P1 C70/S70/V70 sedans and wagons.
Weitec spring sets offer lowering of approx 35mm from Volvo standard ride height (less on R models and cars equipped with sport suspension packages.)

Ride is noticably firmer and handling is improved while still retaining a good ride quality.

Springs come in a high-quality powdercoated finish.

As spring sets are not stocked items, please allow a reasonable time frame for delivery.

Please contact us for further enquiries.

Click on image to enlarge.

DVS Strut tower to tower brace for Volvo 850 and P1 C70/S70/V70

DVS 850/S70/V70 Strut tower to strut tower brace sets are made from the highest quality materials and will fit Volvos 850/S70/V70 cars from 1993 to 2000.

The kit includes 5mm steel top plates, aircraft quality adjustable heim joints, 25mm OD chrome-moly cross bar and high-tensile fasteners.

* 1997 onwards S70/V70 cars with fusebox mounted on a bracket attached to the LH strut tower will require a modification to this bracket.
A diagram is supplied with the kit showing where the bracket needs to be modified. We can also supply you with a modified bracket on a changeover basis at additional cost. Please contact us if you have any queries regarding this.

Download a pdf for modified fusebox bracket instructions.

Strut tower to tower brace sets are powdercoated in Charcoal Metallic Pearl. Other colours are available at additional cost, upon request.

$270.00

Click on images to enlarge.

DVS Aluminium checkerplate sumpguards for Volvo 850/C70/S70/V70

DVS aluminium checker-plate sumpguards are designed to protect the sump and transmission on 850, S70 and V70 volvos up to 2000 models, including AWD.

The sump and transmission on 850, S70 and V70 cars are often vulnerable to damage from debris, rocks or anything else that may be lying on the road.

The sumpguards bolt up to the subframe rails using machine screws supplied. Sumpguards come with pre-drilled holes for the machine screws and an opening for the sump plug.
They will fit all 1993 - 2000 850 & C70/S70/V70 series Volvos.

$215.00

Click on images to enlarge.

Pipercross Air Filters for Volvo 850 and P1 C70/S70/V70

Pipercross air filters offer superior flow over standard paper flat panel filters and flow better than many other reusable filters on the market. They are fully servicable and reuasble and will last the lifetime of the vehicle.

Please contact us for further enquiries.

K&N Air Filters for Volvo 850 and P1 C70/S70/V70

K&N air filters offer improved flow over standard paper flat panel filters, and are fully washable and reuasble. Never buy another filter again!

Please contact us for further enquiries.

Volvo 850/C70/S70/V70 urethane upper engine mount

The original Volvo upper engine mount is a component that commonly fails.
The mount is located near the top of the engine and connects the engine to the firewall.

We now sell high-quality Australian-made urethane upper engine mounts.
These urethane replacement mounts have a far longer service life than that of the original and, due to their two-piece design, installation is simple and can be done with common hand tools.

Available for 1993 - 1999 850 & S70/V70 as well as C70 models. Please specify the year of your vehicle when ordering.

Weight: 0.5kg

$46.00

Click on image to enlarge.

Performance brake pads and rotors

We offer performance brake upgrades for Volvo 240, 740 and 850/C70/S70/V70 models.
We can provide a range of EBC brake pads as well as genuine Volvo or slotted ATE and Brembo rotors

We do however recommend that if you are replacing discs, that you replace the pads at the same time.
Please specify your model and year when ordering.

As brake components/kits are not stocked items, please allow a reasonable time frame for delivery.

POA. Please contact us for further enquiries.